Uniden BCD325P2 Owners Manual - Page 98
Auto Search and Store
View all Uniden BCD325P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
5. Repeat for any other search keys you want to program. Press L/O to exit. The default settings are: SRCH 1: Custom 1 SRCH 2: Public Safety SRCH 3: Band Scope Mode Auto Search and Store Auto Search and Store allows you search and store frequencies from enabled custom search ranges or a service search range into a conventional system, or new talkgroup IDs into a trunked system. To store frequencies or talkgroup IDs you find during Auto Store, you must first select a system where the frequencies or talkgroup IDs will be stored. You will not hear any audio in this mode. See Max Auto Store first to set the maximum number of hits the scanner will store. Tip: Before you start an auto search and store, run the custom search(es) or service search first to lock out the birdies, data, noise, etc. This will prevent the scanner from stopping on them and doing a memory check each time it passes. To Auto Store Conventional Frequencies, press Menu. 1. Scroll to 'Search for...' and press E/yes. 2. Scroll to 'Search and Store' and press E/yes. 3. At 'Select Store Sys' scroll to the conventional system you want to store the frequencies in and press E/yes. 4. At 'Select Range' scroll to the 'service search' or to 'custom search' to select where to search from and press E/yes. Note: The quick key for the system must be turned on (if one is assigned to the system) and not locked out to select the system to store frequencies in otherwise you will see 'Nothing to Scan'. If no systems are programmed 'No System Stored' appears. When you have selected a service search or custom search range(s), the scanner looks for active frequencies within the range(s) and 'Search and Store' appears on the display's lower line and the system name and search range name(s) appear on the display's upper line. When the scanner finds an active transmission, it checks to see if the frequency has already been stored in the system ('Memory Check' in the display). If the frequency has already been stored, the scanner continues to search. If the frequency has not been stored, it stores the frequency into a (created) group named 'Found Channels', then resumes searching. 'Limit Reached' will appear in the display when the Max Auto Store value is reached. To Auto Store IDs, press Menu. 1. Scroll to 'Search for...' and press E/yes. 2. Scroll to 'Search and Store' and press E/yes. 98