Uniden BCD325P2 Owners Manual - Page 53
Set Site Type EDACS only
View all Uniden BCD325P2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
For Standard Motorola 800 MHz rebanded systems set Band Plan 1 and Band Plan 2 as follows: Band Plan 1 2 Lower Base Freq 851.025 851.0125 Upper Base Freq 854.0000 868.9875 Offset 440 0 Polarity Spacing + 25 kHz + 25 kHz Set Site Type (EDACS only) This is where you select a Wideband or Narrowband EDACS site. 1. Scroll to 'Set Site Type' and press E/yes. 2. Scroll to 'Wide (Standard)' or 'Narrow' and press E/yes to save and exit. Note: EDACS Wide is the same as EDACS Standard and uses a 9600 baud control channel. EDACS Narrow-band sites use a 4800 baud control channel. Set Frequencies This is where you program or change the trunking frequencies, delete frequencies, or lock them out. 1. To Program New Frequencies, scroll to 'Set Frequencies' and press E/yes. 2. At 'Sel Frequency' scroll to 'New Frequency' and press E/yes. 3. At 'Input Frequency' enter the frequency and press E/yes. (For EDACS and LTR sites only, at 'Input LCN' enter the LCN number and press E/yes.) 4. Scroll to 'New Frequency' press E/yes to enter more frequencies. 5. Press Menu twice to return to the 'Edit Site' menu. 6. To Edit Frequencies, scroll to 'Set Frequencies' and press E/yes. 7. At 'Sel Frequency' scroll to the frequency you want to edit and press E/yes. 8. Scroll to' Edit Frequency' press E/yes. 9. Edit the frequency and press E/yes to save and exit. For EDACS and LTR sites only: 1. At 'Input LCN' enter the LCN number and press E/yes. 2. Scroll to 'Set Lockout' press E/yes. Set the lockout status and press E/yes to save and exit. 3. Scroll to' Delete Frequency' press E/yes. 4. At 'Confirm Delete' press E/yes. You will return to the 'Edit Site' menu. 5. Press Menu twice to return to the site menu. 53