ZyXEL ES-2108PWR User Guide - Page 114

Chapter 11 Spanning Tree Protocol Table 28 Advanced Application > Spanning Tree Protocol: Status, MSTP (continued) LABEL DESCRIPTION Forwarding Delay This is the time (in seconds) the root switch will wait before changing states (that (second) is, listening to learning to forwarding). Cost to Bridge This is the path cost from the root port on this Switch to the root switch. Port ID This is the priority and number of the port on the Switch through which this Switch must communicate with the root of the Spanning Tree. Configuration Name This field displays the configuration name for this MST region. Revision Number This field displays the revision number for this MST region. Configuration Digest A configuration digest is generated from the VLAN-MSTI mapping information. This field displays the 16-octet signature that is included in an MSTP BPDU. This field displays the digest when MSTP is activated on the system. Topology Changed Times This is the number of times the spanning tree has been reconfigured. Time Since Last Change This is the time since the spanning tree was last reconfigured. Instance: These fields display the MSTI to VLAN mapping. In other words, which VLANs run on each spanning tree instance. Instance VLAN MSTI Bridge Bridge ID Internal Cost Port ID This field displays the MSTI ID. This field displays which VLANs are mapped to an MSTI. Select the MST instance settings you want to view. Root refers to the base of the MST instance. Our Bridge is this Switch. This Switch may also be the root bridge. This is the unique identifier for this bridge, consisting of bridge priority plus MAC address. This ID is the same for Root and Our Bridge if the Switch is the root switch. This is the path cost from the root port in this MST instance to the regional root switch. This is the priority and number of the port on the Switch through which this Switch must communicate with the root of the MST instance. 114 ES-2108 Series User's Guide