ZyXEL ES-2108PWR User Guide - Page 45
Base-FX Fiber-Optic Port
View all ZyXEL ES-2108PWR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Figure 14 Transceiver Installation Example Chapter 3 Hardware Overview 2 Press the transceiver firmly until it clicks into place. 3 The Switch automatically detects the installed transceiver. Check the LEDs to verify that it is functioning properly. Figure 15 Installed Transceiver 3.1.4.2 Transceiver Removal Use the following steps to remove a mini GBIC transceiver (SFP module). 1 Open the transceiver's latch (latch styles vary). Figure 16 Opening the Transceiver's Latch Example 2 Pull the transceiver out of the slot. Figure 17 Transceiver Removal Example 3.1.5 100 Base-FX Fiber-Optic Port This 100 Base-FX fiber-optic port is only available on the ES-2108-LC. 1 To avoid possible eye injury, do not look directly into a module's fiber-optic connectors. Keep the dust cover on a fiber-optic module until you connect it. ES-2108 Series User's Guide 45