ZyXEL ES-2108PWR User Guide - Page 82

Chapter 7 Basic Setting Figure 38 Basic Setting > Port Setup (ES-2108-G) The following table describes the labels in this screen. Table 13 Basic Setting > Port Setup LABEL DESCRIPTION * Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Port Active Name Note: Changes in this row are copied to all the ports as soon as you make them. This is the port index number. Select this check box to enable a port. The factory default for all ports is enabled. A port must be enabled for data transmission to occur. Enter a descriptive name that identifies this port. You can enter up to 64 alphanumerical characters. Type Note: Due to space limitation, the port name may be truncated in some web configurator screens. This field displays 10/100M for an Ethernet connection and 10/100/1000M for the Gigabit Ethernet/mini-GBIC slots and 100M for a 100 base-FX fiber-optic port on the ES-2108-LC or a Fast Ethernet SFP transceiver connection on the ES-2108-F. 82 ES-2108 Series User's Guide