Brother International HS-5300 Service Manual - Page 118
Lower, holder, roller, spring, heater, harness, heater, frame, platen, thermistor
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
4.27 Lower Nip Holder ASSY Caution: The Lower nip roller spring B is the thin metal part. Be careful with the sharp edge. (1) Remove all of the Lower nip roller spring and the Lower nip holder ASSY A, B and C. Lower nip holder C ASSY 0 Lower nip holder A ASSY Lower nip roller spring B Lower nip roller spring B Lower nip roller spring B Lower nip holder B ASSY Fig. 4.108 4.28 Air Duct ASSY 4.28.1 Air duct ASSY (1) Cut the cable ties for the core on the Pre-heater harness, the Main heater harness and the Q-platen thermistor harness from the bottom of the Main frame ASSY. Then remove all the core. (2) Lift the Air duct ASSY and the Platen grounding spring upwards while carefully observing the harness. Main frame ASSY Pre-heater harness M-platen ASSY "F Q-platen ASSY Q-platen thermistor harness \CP Air duct ASSY Main heater harness Fig. 4.109 III-66