Brother International HS-5300 Service Manual - Page 149
Adjustment
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
PR98187 3.2.5 Test 2 Mode Immediately after entering this mode, the Alarm LED blinks. Every time the online switch is pressed, the LED position steps down to the next one. The following hidden functions are assigned to the respective LED. By pressing the FF/Cont switch, the selected test function will be executed. 1 ALARM LED blinking Online 1 MANUAL LED blinking Online 1 DATA LED blinking Online I READY LED blinking Online FF/Cont FF/Cont FF/Cont FF/Cont ► Ink Supply Test Mode ► Purge Air Pressure Measure Mode ► Head Voltage Adjustment Mode ► Fan Motor Rotation Test Mode [Ink Feeder Test Mode] (DO NOT USE!) Remove the Ink case ASSY. According to the pressing of following switches, it will feed a ink pellet. SWITCH FF/Cont Reset Online + FF/Cont Online + Reset INK Magenta Cyan Black Yellow It is possible to perform the above repeatedly and it is necessary to reset the printer by turning off the power switch to quit this mode. [Purge Air Pressure Measure Mode] (DO NOT USE!) Rotates the purge motor continuously by pressing the FF/Cont switch. it will stop the purge motor if the FF/Cont switch is pressed while the purge motor is rotating. It is possible to perform the above repeatedly and it is necessary to reset by turning off the power switch to quite this mode. [Head Voltage Adjustment Mode] This is a mode for adjustment of the voltage to drive the heads. The selected voltage can be changed for 300 dpi or 600 dpi according to the pressing of the following switches. SWITCH FF/Cont Reset MODE 600 dpi 300 dpi It is possible to perform the above repeatedly and it is necessary to reset the printer by turning off the power switch to quit this mode. IV-15