Brother International HS-5300 Service Manual - Page 17
Brother International HS-5300 Manual
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2. Press the Online button to select another test. Every time you press the button, the blinking LED changes to select another choice. See the table below. 3. Press the FF/Cont button to perform the selected choice. LED Alarm Manual Data Choice Function Print Config The printer prints the current printer settings. Print Fonts I The printer prints a list of the printer resident fonts. Print Fonts P The printer prints a list of the permanent download fonts. 4. The printer returns to the ready status after printing. 4.10.12 Reset and Hex Dump print mode The printer has the following Reset and Hex Dump print modes. 1. Keep the FF/Cont button depressed until all four LEDs light. Then, release the button. The printer enters the reset/hex dump mode. The Alarm LED blinks to indicate that the first choice, User Reset, is selected. See the table below. 2. Press the Online button to select another choice. Every time you press the button, the blinking LED changes to indicate another choice. See the table below. 3. Press the FF/Cont button to perform the selected choice. LED Alarm Manual Data Choice User Reset Factory Reset Hex Dump print Function The printer is restored to the user default settings without clearing permanent fonts and macros. The printer is restored to the factory settings and permanent fonts and macros are cleared. The printer can print data as hexadecimal values, so that you can check data errors and problems. To exit from this mode, press the Reset button or turn the printer off. 4. The printer returns to the ready status after printing