Brother International HS-5300 Service Manual - Page 44
calculated.
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
2.5 Sensors The printer has the following sensors. Paper empty sensor Paper regist solenoid 2nd PF solenoid Media sensor o )i\ Pre-heat platen thermistor Heat platen thermistor Quentch platen thermistor 1st PF solenoid Encoder Maintenance paper empty switch . Paper eject Cover open switch sensor Paper width sensor Cam home position switch Fig. 2.20 (1) Paper empty sensor (PFS) The paper empty sensor is placed adjacent to the regist roller and detects the top edge of the paper fed by the paper feed roller. If the paper feed sensor cannot detect the top edge of the paper, it is handled as either a miss-pick or paper empty. After the top edge of the paper is detected, the paper feeding amount to correct skewing and the timing to start rotating the regist roller are calculated. (2) Media sensor (MED) The media sensor is placed between the regist roller and the PA roller. This is used to detect whether the fed media is paper or an OHP film. Depending on the type of the media, the platen temperature is controlled. (3) Paper width sensor (PW) The paper width sensor is placed on the carriage and detects width of the fed paper to prevent printing onto the platen. (4) Encoder (ENC) The encoder is placed on the carriage and detects the carriage position using the encoder strip to control the printing process. (5) Paper eject sensor (POS) 11-25