Brother International HS-5300 Service Manual - Page 88
backwards.
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
PR98064 (3) Remove the screw securing the PA roller gear plate and the three screws securing the PA motor holder weld ASSY, slightly pull the PA motor ASSY towards you and move it backwards. Main frame ASSY 0 Taptite, cup S M3X6 Taptite, bind B M3X10 Co) qqk C C 141./ C PA roller gear plate Taptite, bind B M3X10 PA motor holder weld ASSY Fig. 4.53 (4) Remove the two screws securing the PA motor ASSY and remove it. (5) Remove the two screws, then remove the High-damping rubber. (6) Remove the Ferrite core. High-damping rubber PA motor C Ferrite core Screw, pan, cup M4X5 Taptite, cup M4X5 Shoulder screw, M4X5 PA motor holder weld ASSY Fig. 4.54 Notel: There are three kinds of screws used to secure the PA motor holder weld ASSY. Ensure that they are all refitted correctly. Refer to fig. 454. Mind the order of securing screws. Screw, pan, cup M4X5 has to be secured prior to Shoulder screw, M4X5. III-36