Brother International HS-5300 Service Manual - Page 7
System, Requirements, Features
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
CHAPTER I FEATURES AND SPECIFICATIONS 1. SYSTEM REQUIREMENTS Check the following minimum system requirements to setup and operate the printer: • IBM PC or compatible with 80486 SX (higher microprocessor recommended) • Parallel interface port • 4MB or more memory on PC (8MB recommended) • 10MB of space available on your hard disk for the printer driver and all fonts • Microsoft Windows 3.1/ 3.11/ 95 • MS-DOSTM or PC-DOS • Macintosh connectivity is available with an optional MIO board. 2. FEATURES This printer has the following features: 600dpi Resolution and 4.5ppm Printing speed Excellent printing quality at 600 dots per inch (dpi) resolution and fine output at 300dpi resolution. Fast print speed of 4.5 pages per minute (ppm) in normal mono mode and 4ppm in normal color mode (Letter size). High print quality The ink is solid and water-proof so that you can get fine print quality even on plain paper without having to use special coated paper. Solid ink provides a professional print quality with sharp text and vivid color. User-Friendly Operation for Windows The dedicated printer driver and TrueTypeTM - compatible fonts for Microsoft Windows 3.1/3.11/ 95 are available on the floppy disk supplied with a printer. You can easily install them into the Windows system using our installer program. The printer driver provides a Brother own color matching engine and automatic color selection function. It helps you to get fine color printing easily. Color Matching The Brother original color matching system which is included in the printer driver enables color matching between the monitor and printer and offers control of various color effects. It helps you to get fine color output. This printer also supports the Windows 95 Image Color Matching (ICM) system. Environment-Friendly This printer has two Power Saving Modes. Printers consume power to keep some parts of the printer at operating (high) temperature, but this feature will save electricity when the printer is ON but not being used. The factory setting of Power Save model and mode 2 are both OFF, however, for reduced power consumption, you can turn Power Save Mode 1 and 2 to ON. The default time-out of each mode is one hour. This meets Energy Star power save requirements. 1-1