Brother International HS-5300 Service Manual - Page 145
The FF/Cont
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
3.2.2 Self Printing 1 Mode Immediately after entering this mode, the Alarm LED blinks. Every time the online switch is pressed, the LED position steps down to the next one. The following hidden functions are assigned to the respective LED. By pressing the FF/Cont switch, the selected self printing will be executed. 1 ALARM LED blinking Online 1 MANUAL LED blinking Online 1 DATA LED blinking Online I READY LED blinking Online FF/Cont FF/Cont FF/Cont FF/Cont ► Print Config ► NVRAM Dump 0 Continuous Printing of Blank Sheets ► Continuous Printing of the Ripple Pattern [Print Config] Prints the status of the hidden function settings. After printing, the printer will return to the ready status. [NVRAM Dump] Prints the contents of the whole NVRAM as a HEX dump. After printing, the printer will return to the ready status. [Continuous Printing of Blank Sheets] Continuously prints a blank page with a count of the printed pages. It is possible to pause and restart by pressing the online switch. The FF/Cont switch can be used to release errors. It is necessary to reset by turning off the power switch or pressing the reset switch to quit this mode. [Continuous Printing of the Ripple Pattern] Continuously prints a ripple pattern sheet with a count of the printed pages. It is possible to pause and restart by pressing the online switch. The FF/Cont switch can be used to release errors. It is necessary to reset by turning off the power switch or pressing the reset switch to quit this mode. IV-11