Brother International HS-5300 Service Manual - Page 37
changeover>
View all Brother International HS-5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2.3 Ink Holder and Ink Supply Mechanism In this printer, ink is supplied from a solid ink block which is set into the ink case and fed to the head through the ink supply mechanism. (1) Refilling of solid ink blocks • Opening the ink silo cover enables setting of solid ink blocks in the ink case. • Unpack the ink package, take out a new ink holder, and set it in the ink case. Press the concave section on the top of the ink holder to insert the solid ink blocks into the ink case. After that, dispose of the ink holder. • After the solid ink has been inserted, close the ink silo cover to enable the ink supply to the head. (2) Ink supply to the head • The carriage is moved to the home position and the change mechanism operated to connect the paper transport mechanism and the ink supply mechanism using a clutch. After they are engaged, the ink supply mechanism can be operated by the PA motor. • The carriage is moved to the ink supply position. (Four positions for each individual color) • Rotation of the PA motor starts the ink supply mechanism, which is in a stand-by mode, to supply the ink from the solid ink block set in the ink case to the head. • Another rotation of the PA motor brings the ink supply mechanism back to the stand-by mode. • The carriage is moved to an area beyond the ink supply position, the change mechanism operated to release the clutch and disengage the drive between the paper transport mechanism and the ink supply mechanism. Rib for changing correct of carriage Cam Carriage operation _...al Gear Carriage home position ,o Fig. N2.29 11-18 Clutch to be connected