HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 105

createaocfg DESCRIPTION The createaocfg command creates an Adaptive Optimization (AO) configuration. AUTHORITY Super, Edit SYNTAX createaocfg [options ] OPTIONS -t0cpg Specifies the Tier 0 CPG for this AO config. -t1cpg Specifies the Tier 1 CPG for this AO config. -t2cpg Specifies the Tier 2 CPG for this AO config. -mode Specifies the optimization bias for the AO configuration, which can be one of the following: • Performance - Move more regions towards higher performance. • Balanced - Balanced between higher performance and lower cost. • Cost - Move more regions towards lower cost tier. The default optimization bias mode is Balanced. SPECIFIERS Specifies an AO configuration name up to 31 characters in length. NOTES • Two or more Tier CPGs must be defined. • If domains are used, all CPGs must be in the same domain or not in any. • A CPG can only belong to one AO configuration. • Active use of Adaptive Optimization requires an Adaptive Optimization license. Contact your HP representative for more information. EXAMPLES The following example creates a new AO configuration called aocfg1. The optimization bias (mode) is set to Cost. Tier 0 will use CPG R1SSDcpg, Tier 1 will use CPG R5FCcpg and Tier 2 will use CPG R6NLcpg. cli% createaocfg -t0cpg R1SSDcpg -t1cpg R5FCcpg -t2cpg R6NLcpg -mode Cost aocfg1 createaocfg 105