HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 265

servicemag DESCRIPTION The servicemag command executes service on a drive magazine or disk. SYNTAX The syntax for the servicemag command can be one of the following: • servicemag start [options] • servicemag start [options] -pdid ... • servicemag resume|unmark [options] • servicemag status [options] [ ] • servicemag clearstatus AUTHORITY • Super, Service • Any role granted the mag_service right. NOTE: You need access to all domains in order to run this command. SUBCOMMANDS start Specifies that the servicemag command informs the system manager to log or relocate disks on a drive magazine so that the drive magazine can be removed for service. resume Specifies that the servicemag command informs the system manager that a drive magazine is replaced and that data services can be resumed. unmark Specifies that the servicemag operation is stopped and its internal state is reset. Since the servicemag operation is a multistep process, specifying unmark stops the servicemag operation at the completion of the current step. Relocation of chunklets is considered one step and can take from several minutes to several hours (depending on number of chunklets) to complete. If servicemag unmark is issued during the relocation phase, the spin-down phase will indicate that the servicemag start operation Failed. This can be confirmed by issuing servicemag status -d. If the intent was to prevent servicemag from completing, issue servicemag resume to move the data back onto the drive(s) in this magazine once the servicemag start operation reports a failure. The unmark option should not be used without consulting with HP 3PAR engineering. status Specifies that the status of the servicemag command operations on a drive magazine are displayed. This subcommand is permitted for Super, Service, Edit and Browse users. Summary status is provided by default, and the -d option can be used to get detailed status. clearstatus Clears the log shown by the servicemag command status for the given cage and magazine. OPTIONS -f servicemag 265