HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 257
<host_name | host_set>, showvlun, removevlun, host1, host_name, confirmation to remove VLUNs
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
slot Specifies the PCI bus slot in the node where slot is a number from 0 through 5. port Specifies the FCS port number of the card in PCI bus slot using 1 through 4. Specifier requests that exports to the specified host or host set, named using up to 31 characters in length, be removed. The host set name must start with set:. If this specifier is not used, the N:S:P specifier must be used. RESTRICTIONS • To remove a specific VLUN, you must supply the same specifiers and options that you used when that VLUN was created. Use the showvlun-t command to view all created VLUN specifiers and options. • Issuing the removevlun command with the -pat option specified returns a request for confirmation to remove VLUNs, unless the -f option is specified. EXAMPLES The following example deletes VLUNs for volume vv0, LUN 0, host host1: cli% removevlun -f vv0 0 host1 NOTES • If the VLUN to be removed is a matched set, use the port and host_name specifiers. • Verify the removal of VLUNs by issuing the showvlun command. See "showvlun" (page 503) for more information. removevlun 257