HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 263

servicehost DESCRIPTION The servicehost command executes removal and replacement actions for a host connecting to an HP 3PAR Storage System port. SYNTAX The syntax for the servicehost command can be one of the following: • servicehost list • servicehost remove [-f] [ [...]] • servicehost copy [-f] AUTHORITY • Super, Service • Any role granted the host_service right. NOTE: You need access to all domains in order to run this command. Can vary for each subcommand as noted in the following section. SUBCOMMANDS list Displays a list of all inactive hosts. Permitted for all users. remove Removes an inactive host, as specified with the specifier, from the indicated port () and its associated VLUNs. If the specifier is not issued with the remove subcommand, all inactive hosts on the specified port and their LUNs are removed. If the specifier is not used with the remove subcommand, all inactive hosts in the system and their LUNs are removed. See "RESTRICTIONS" for additional information about the remove subcommand. copy Copies all active VLUNs from the specified source port (as specified with ) from host WWNs or iSCSI names matching the specified pattern () to the destination port (as specified with ). If necessary, the port is reset to target mode. OPTIONS -f Specifies that the command is forced. If this option is not used, the command requires confirmation before proceeding with its operation. SPECIFIERS Specifies the host to be removed which is visible to the specified port. This specifier can only be used with the remove subcommand. servicehost 263