HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 634
stoprcopy, option is not used, all groups must already be stopped.
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 634 highlights
stoprcopy DESCRIPTION The stoprcopy command disables the Remote Copy functionality for any started Remote Copy volume groups. SYNTAX stoprcopy [options] AUTHORITY Super, Edit Any role granted the rcopy_stop right. NOTE: You need access to all domains in order to run this command. OPTIONS -f Specifies that any started copy will not ask for confirmation for the -clear option. -stopgroups Specifies that any started Remote Copy volume groups are stopped. -clear Specifies that configuration entries affiliated with the stopped mode are deleted. CAUTION: Issuing the stoprcopy -clear command completely removes the Remote Copy setup and is NOT reversible. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example disables the Remote Copy functionality of all primary Remote Copy volume groups: # stoprcopy -stopgroups NOTES • If the -stopgroups option is not used, all groups must already be stopped. • An older version of this command provided specifiers to disable the primary or backup systems. These specifiers were deprecated in HP 3PAR OS release 2.2.3. • Unless the -stopgroups option is used, the command will fail if there are any Remote Copy groups that are started. If the -clear option has been used, the configuration is completely erased. Consequently, Remote Copy operations cannot be restarted using only the startrcopy command. The configuration must be rebuilt. Therefore, the -clear option requires confirmation with the -f option, the TPDFORCE environment variable, or by 634 Stop Commands