HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 228

20 Remove Commands removealert DESCRIPTION The removealert command removes one or more alerts from the system. CAUTION: Use care when removing alerts. Alerts that have not been fixed or acknowledged should not be removed. SYNTAX removealert [option] -a|... AUTHORITY • Super, Service • Any role granted the alert_remove right. NOTE: You need access to all domains in order to run this command. OPTIONS -a Specifies all alerts from the system and prompts removal for each alert. If this option is not used, then the specifier must be used. -f Specifies that the command is forced. If this option is not used and there are alerts in the new state, the command requires confirmation before proceeding with its operation. SPECIFIERS ... Indicates a specific alert be removed from the system. This specifier can be repeated to remove multiple alerts. If this specifier is not used, the -a option must be used. RESTRICTIONS Access to all domains is required to run this command. EXAMPLES The following example displays all alerts from the system with the option to remove individual alerts: cli% removealert -a Id 120 - New Occurred 4 times, last at Tue May 03 22:45:47 PDT 2005 Message code: 196609 Tue May 03 22:23:17 PDT 2005 Node: 0 Severity: Minor Firmware coredump event Firmware COREDUMP: recovered file /var/core/hba/fwcore.n00.s02.p01.20050503.224547 Alert 120 is marked as "New". 228 Remove Commands