HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 407
shownet, shownet [option]
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 407 highlights
shownet DESCRIPTION The shownet command displays the configuration and status of the administration network interfaces, including the configured gateway and Network Time Protocol (NTP) server. SYNTAX shownet [option] AUTHORITY Any role in the system. OPTION -d Displays detailed information. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example displays the status of the system administration network interfaces: cli% shownet -d IP Address: 192.168.5.191 Assigned to nodes: 01 Connected through node 0 Status: Active Netmask 255.255.252.0 Admin interface on node 0 MAC Address: 00:02:AC:43:00:34 RX Packets: 534389 RX Bytes: 67828134 RX Errors: 0 RX Dropped: 0 RX FIFO Errors: 0 RX Frame Errors: 0 RX Multicast: 0 RX Compressed: 0 TX Packets: TX Bytes: TX Errors: TX Dropped: TX FIFO Errors: TX Collisions: TX Carrier Errors: TX Compressed: Remote copy interface in slot 1 on node 0 MAC Address: 00:04:23:C2:1B:72 RX Packets: 0 TX Packets: RX Bytes: 0 TX Bytes: RX Errors: 0 TX Errors: RX Dropped: 0 TX Dropped: RX FIFO Errors: 0 TX FIFO Errors: RX Frame Errors: 0 TX Collisions: RX Multicast: 0 TX Carrier Errors: RX Compressed: 0 TX Compressed: Remote copy interface in slot 1 on node 0 MAC Address: 00:04:23:C2:1B:73 RX Packets: 0 TX Packets: 121669 60638375 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 shownet 407