HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 328

setsnmpuser DESCRIPTION The setsnmpuser command sets the SNMPv3 user secret key used for generating authentication and privacy keys. The username must correspond to an existing local user. WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security of the storage system. SYNTAX setsnmpuser AUTHORITY • Super, Service, Edit, Browse • Any role granted the snmpuser_set right. OPTIONS None. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example shows the setting of a specified SNMP user: cli% setsnmpuser NOTES Issuing the setsnmpuser command results in the system prompting for a password. Type in the password for the user and then press ENTER. The password will be used to generate an authentication and privacy key using SHA1. The generated key is 160-bit in length. Only HMAC-SHA-96 is supported for authentication protocol and only CFB128-AES-128 for privacy protocol. If a key previously exists for the user, then the newly generated key will replace the previous one. 328 Set Commands