HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 410

Specifies detailed information in verbose format. It can be used with any of the following component options: -fan Displays the node fan information. -pci Displays PCI card information. -cpu Displays CPU information. -mem Displays physical memory information. -drive Displays the disk drive information. -ps Displays power supply information. -mcu Displays MicroController Unit information. -state Displays the detailed state information for the node or power supply (proceed with the -ps option). This is the same as -s. -s Displays the detailed state information for node or power supply (proceed with the -ps option). This option is deprecated and will be removed in a future release. -uptime Shows the amount of time each node has been running since the last shutdown. -svc Displays inventory information with HP serial number, spare part number, and so on. This option must be used with the -i option and it is supported only on HP 3PAR StoreServ 7000 Storage systems. SPECIFIERS ... Displays the node information for the specified node ID(s). This specifier is not required. Restrictions None. EXAMPLES The following example displays the operating environment status for all nodes in the system: cli% shownode Control Data Cache Node --Name-- -State- Master InCluster ---LED--- Mem(MB) Mem(MB) Available(%) 0 enodec34 OK Yes Yes GreenBlnk 2048 2048 100 1 enodec33 OK No Yes GreenBlnk 2048 2048 100 410 Show Commands