HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 333

setsys DESCRIPTION The setsys command sets the properties of the system, and includes options to annotate a system with descriptor information such as physical location, owner, contact information, and so on. The command also enables you to set system-wide parameters such as the raw space alert. SYNTAX setsys [options] setsys AUTHORITY • Super, Service • Any role granted the sys_set right. NOTE: You need access to all domains in order to run this command. OPTIONS The following option is designed for changing the name of the system: -name Specifies the new name of the system up to 31 characters in length. The following options allow the annotation of the system with descriptor information: -loc Specifies the location of the system. -owner Specifies the owner of the system. -contact Specifies the contact information for the system. -comment Specifies any additional information for the system. SPECIFIERS The following parameters can be configured on the system and are issued for the specifier: RawSpaceAlertFC Sets the user configurable space alert threshold (10 to 100000 GB) for Fibre Channel type drives. When the total space on the available chunklets (both clean and unclean) for the specified drive type falls below the specified value, the alert is posted. A value of 0 will disable the alert. RawSpaceAlertNL Performs the same function as RawSpaceAlertFC, but should be used for nearline type drives. RawSpaceAlertSSD Performs the same function as RawSpaceAlertFC, but should be used for solid state drive type drives. RawSpaceAlertSAS setsys 333