HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 23

Node Date Information Command setdate Description Sets the system time and date on all nodes. Authority Super, Service1 Any role granted the date_set right. showdate Displays the date and time Any role in the system. on all system nodes. 1 You need access to all domains in order to run this command. Controller Node Properties Command setnode Description Sets the properties of the node components such as the serial number of the power supply. Authority Super, Service1 Any role granted the node_set right. shownode Displays an overview of the Any role in the system. node specific properties. shownodeenv Displays the node's environmental status. Any role in the system. 1 You need access to all domains in order to run this command. Controller Node EEPROM Log Command showeeprom Description Displays node EEPROM information. Array and Controller Node Information Authority Any role in the system. Command locatenode locatesys setsys showsys Description Authority Locates a particular node Super, Service1 component by blinking LEDs on the node. Any role granted the node_locate right. Locates a system by blinking Super, Service1 its LEDs. Any role granted the sys_locate right. Enables you to set Super, Service1 system-wide parameters such as the raw space alert. Any role granted the sys_set right. Displays the HP 3PAR Storage System properties, including system name, model, serial number, and system capacity. Any role in the system. For Details See "setdate" (page 291) "showdate" (page 373) For Details See "setnode" (page 306) "shownode" (page 409) "shownodeenv" (page 417) For Details See "showeeprom" (page 378) For Details See "locatenode" (page 208) "locatesys" (page 209) "setsys" (page 333) "showsys" (page 482) Node Subsystem Management Commands 23