HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 486

showsysmgr DESCRIPTION The showsysmgr displays startup state information about the system manager. SYNTAX showsysmgr AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS None. RESTRICTIONS None. EXAMPLES The following example displays the startup state information about the system manager. In this example, the system manager reports that it is up and running. cli% showsysmgr System is up and running from Thu May 24 15:39:22 PDT 2007 If the system has experienced a power failure, issuing the showsysmgr command displays the following message: cli% showsysmgr System is recovering from a previous powerfailure. Please use the CLI commands for 'showvv', 'showld', 'showpd' to see any unstarted vvs, lds, pds. If the system has attempted powerfail recovery three times, and during the recovery attempts encountered kernal panics because of hardware or software errors, the following message is displayed. See "NOTES" (page 487) in the following section for additional information. cli% showsysmgr System is recovering from a previous power failure. Please use the 'showvv', 'showld', 'showpd' CLI commands to check for not started vvs, lds, pds. Use force_idewipe to wipe pfail partititon and restart system with all lds/vvs being checked. This can cause some data to be lost. If the system has attempted powerfail recovery, and during the recovery encountered kernal panics because of hardware or software errors, the error could be associated with a specific volume. The 486 Show Commands