HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 298

The World Wide Name (WWN) or iSCSI name of the host which should be reset or for which host agent data should be cleared. node - Specifies the node using a number from 0 through 7. slot Specifies the PCI slot in the specified node. Valid ranges are: • 0 - 9 for the StoreServ 10000 storage system platform • 0 - 5 for the S and T-Class storage system platforms • 0 - 3 for the E200 storage system platform • 0 - 2 for the F-Class storage system platform port Specifies the port using a number from 1 through 4. RESTRICTIONS Access to all domains is required for the clearagent subcommand. EXAMPLES The following example change the settings of a host: cli% sethost -contact "Joe Smith" -model "Sun Ultra 60" queasy10 cli% sethost initchap "MyChapSecret" queasy10 cli% sethost targetchap -hex "30313233343536373839303132333435" queasy10 cli% sethost removechap -target queasy10 cli% sethost clearagent 210100E08B32A58A cli% sethost -persona 1 queasy10 cli% sethost rst -wwn 210100E08B32A58A 0:2:3 NOTES • The CHAP configurations are applied to all hosts whose names match one or more of the specified or specifiers. The patterns are treated as glob-style (shell-style) patterns. Refer to "Glob-Style Pattern" (page 12) for further information. • The options that allow for adding descriptive information are for annotation purposes only; the storage server does not actively use the information provided here. • Remove descriptors by passing an empty string to the command. • Verify modification of host properties by issuing the showhost command. 298 Set Commands