HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 386

showhost DESCRIPTION The showhost command displays information about defined hosts and host paths in the system. SYNTAX showhost [options ] [...|...|...] AUTHORITY Any role in the system. OPTIONS -d Shows a detailed listing of the host and path information. This option can only be used with -agent and -domain options. -verbose Shows a verbose listing of all host information. -chap Shows the CHAP authentication information. -desc Shows the host descriptor information. -agent Shows information provided by host agent. -pathsum Shows summary information about hosts and paths. This option cannot be used with the -d option. -persona Shows the host persona settings in effect. This option cannot be used with the -d option. -listpersona Lists the defined host personas. This option cannot be used with the -d option. Different host personas support different host operating systems and have different capabilities. Host personas may have the following additional capabilities: • UARepLun. Sends a unit attention when the LUN list changes due to adding or removing VLUNs. • ALUA. Enables the Asymmetric Logical Unit Access (ALUA) command and asymmetric state change unit attention when path counts change due to adding or removing ports in the host's definition. • VolSetAddr. Enables HPUX Volume Set Addressing (VSA). • SoftInq. Enables inquiry data formats for hosts such as Egenera and NetApp. • NACA. Enables Normal Auto Contingent Allegiance (NACA) bit for AIX. • SESLun. Enables SCSI Enclosure Services (SES) LUN for host agent support. -noname Shows only host paths (WWNs and iSCSI names) that are not assigned to any host. This option cannot be used with the -d option. -domain | 386 Show Commands