HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 440

showport DESCRIPTION The showport command displays information about ports in the system. SYNTAX The syntax of the showport command can be one of the following: • showport [options] [-failed] [-sortcol [,]][ |...] AUTHORITY Any role in the system. OPTIONS -i Show hardware and inventory formation. -c Displays all devices connected to the port. Such devices include cages (for initiator ports), hosts (for target ports) and ports from other storage systems (for RCFC and peer ports). -par Displays a parameter listing such as the configured data rate of a port and the maximum data rate that the card supports. Also shown is the type of attachment (Direct Connect or Fabric Attached) and whether the unique_nwwn and VCN capabilities are enabled. -rc Displays information that is specific to the Remote Copy ports. -rcfc Displays information that is specific to the Fibre Channel Remote Copy ports. -peer Displays information that is specific to the Fibre Channel ports for Data Migration. -rcip Displays information specific to the Ethernet Remote Copy ports. -iscsi Displays information about iSCSI ports. -iscsiname Displays iSCSI names associated with iSCSI ports. -fcoe Displays information that is specific to Fibre Channel over Ethernet (FCoE) ports. -sfp Displays information about hot pluggable SFPs attached to ports. -ddm Displays information about the SFPs DDM. This option must be used with the -sfp option. -d Displays detailed information about the SFPs attached to ports. This option is used with the -sfp option. 440 Show Commands