HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 533

shutdownsys DESCRIPTION The shutdownsys command shuts down an entire system. SYNTAX shutdownsys halt|reboot AUTHORITY • Super, Service • Any role granted the sys_shutdown right. NOTE: You need access to all domains in order to run this command. SUBCOMMANDS halt Specifies that the system should be halted after shutdown. If this subcommand is not specified, the reboot subcommand must be used. reboot Specifies that the system should be restarted after shutdown. If this subcommand is not specified, the halt subcommand must be used. OPTIONS None. SPECIFERS None. RESTRICTIONS • Access to all domains is required to run this command. • Do not issue any commands other than showsys while the system is shutting down. EXAMPLES The following example shuts down and then restarts the system: cli% shutdownsys reboot -----System Information----System Name : ma1tp001 System Model : InServ S800X Serial Number : 1000787 Partial List Of Hosts Id Name Persona -WWN/iSCSI_Name- Port IP_addr 0 sunx4150-01 Generic-legacy 2101001B32343495 6:5:1 n/a 1 sunx4150-02 Generic-legacy 2101001B32344695 6:5:1 n/a 2 sunx4150-03 Generic-legacy 2100001B32147595 6:5:1 n/a 3 sunx4150-04 Generic-legacy 2101001B32341C95 6:5:1 n/a 4 sunx4150-05 Generic-legacy 2101001B32342495 6:5:1 n/a 5 sunx4150-06 Generic-legacy 2100001B321A6E82 6:5:1 n/a 6 sunx4150-07 Generic-legacy 2101001B3231EE79 6:5:1 n/a shutdownsys 533