HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 213

movechtospare DESCRIPTION The movechtospare command moves data from specified Physical Disks (PDs) to a temporary location selected by the system. SYNTAX movechtospare [options] AUTHORITY • Super, Service, Edit • Any role granted the ch_movetospare right. NOTE: You need access to all domains in order to run this command. OPTIONS -nowait Specifies that the command returns before the operation is completed. -dr Specifies that the operation is a dry run. No chunklets are actually moved. -devtype Permits the moves to happen to different device types. -f Specifies that the command is forced. If this option is not used, the command requires confirmation before proceeding with its operation. SPECIFIERS Indicates that the move takes place from the specified PD () and chunklet position (). RESTRICTIONS Access to all domains is required to run this command. EXAMPLES In the following example, chunklet 0 from physical disk 66 is moved to spare: cli% movechtospare 66:0 Are you sure you want to move the chunklet to spare? select q=quit y=yes n=no: y Move -Status- -Detailed_State-- 66:0-54:49 normal ch_moved,normal The columns in the previous example are identified as follows: • Status. The overall status of the move. • normal. Indicates the chunklet has successfully moved with no loss of quality. • degraded. Indicates the chunklet has successfully moved with loss of quality. movechtospare 213