HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 300
setlicense
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 300 highlights
setlicense DESCRIPTION The setlicense command sets the license key information. SYNTAX setlicense [options ] AUTHORITY • Super, Service • Any role granted the license_set right. NOTE: You need access to all domains in order to run this command. OPTIONS -f Specifies the file from which the license key is read. -noconfirm Specifies that the system does not prompt for confirmation for the new license key. SPECIFIERS None. RESTRICTIONS • Access to all domains is required to run this command. • The entered license key is accepted only if it is recognized as a valid key. A valid license key includes an appropriate serial number and is associated with the number of nodes in the system for which the license key is being entered. • HP 3PAR's license terms and conditions must be accepted before proceeding with this command. EXAMPLES The following example displays the setting of a license key: cli% setlicense If this software is being provided to you for a limited evaluation period, then your license shall be governed by the current HP Software License Terms (or as otherwise agreed between us) with the exception that the term of the license shall expire upon the earlier of the evaluation period notified to you or 120 days. Upon expiration of the license, you must cease using the software and HP reserves the right to disable the software without notice. By using or activating the software you are agreeing to these terms. Do you agree to these terms and conditions? y=yes n=no: yes Please enter the new license key below. When finished, press enter twice. If the key is entered by hand, note that characters other than letters and numbers are ignored, and the key is not case-sensitive. 60R3-0C1G... 300 Set Commands