HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 261
Service Commands, servicecage, FC-AL module. Both
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 261 highlights
21 Service Commands servicecage DESCRIPTION The servicecage command is necessary when executing removal and replacement actions for a drive cage FC-AL module. The startfc or unstartfc subcommands are used to initiate service on a cage, and the endfc subcommand is used to indicate that service is completed. SYNTAX The syntax for the servicecage command can be one of the following: • servicecage remove [-f] • servicecage startfc|unstartfc|endfc|resetfc|hresetfc|clearlog [-f] [-ovrd] [a|b]|[0|1] AUTHORITY • Super, Service • Any role granted the cage_service right. NOTE: You need access to all domains in order to run this command. Can vary for each subcommand as noted in the following section. SUBCOMMANDS startfc Prepare an FC-AL module for removal. unstartfc Stop the startfc subcommand. See "NOTES" for additional information about the unstartfc subcommand. endfc Indicates that service on the drive cage is completed and allows the system to resume use of the FC-AL module. Both startfc and unstartfc need this action to complete the service operation. See "NOTES" for additional information about the endfc subcommand. Permitted for Edit user in addition to Super and Service users. resetfc • For DC1 and DC3 drive cages, soft resets the FC-AL module. • For DC2 and DC4 drive cages, resets the cage. FC-AL specifier is ignored. hresetfc • For DC1 and DC3 drive cages, hard reset the FC-AL module. • For DC2 and DC4 drive cages, hard reset the cage. FC-AL specifier is ignored. remove Removes the indicated drive cage (indicated with the specifier) from the system. If this subcommand is used, the a|b or 0|1 port specifier is not required. This command fails when the cage has active ports or is in use. Only permitted for a Super user. servicecage 261