HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 361

showcage DESCRIPTION The showcage command displays information about drive cages. SYNTAX The syntax of the showcage command can be one of the following: • showcage [options] [-d] [...] • showcage [-sfp [-d|-ddm]] [...] • showcage -i [...] • showcage -svc -i [...] AUTHORITY Any role in the system. OPTIONS -d Specifies that more detailed information about the drive cage is displayed. If this option is not used, then only summary information about the drive cages is displayed. -e Displays error information. -c Specifies to use cached information. This option displays information faster because the cage does not need to be probed, however, some information might not be up-to-date without that probe. -sfp Specifies information about the SFP(s) attached to a cage. Currently, additional SFP information can only be displayed for DC2 and DC4 cages. -ddm Specifies the SFP DDM information. This option can only be used with the -sfp option and cannot be used with the -d option. -i Specifies that inventory information about the drive cage is displayed. If this option is not used, then only summary information about the drive cages is displayed. -svc Displays inventory information with HP serial number, spare part number, and so on. This option must be used with the -i option and it is supported only on HP 3PAR StoreServ 7000 Storage systems. SPECIFIERS ... Specifies a drive cage name for which information is displayed. This specifier can be repeated to display information for multiple cages. If no specifiers are used, the command defaults to displaying information about all cages in the system. RESTRICTIONS None. showcage 361