HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 475

showsnmpuser DESCRIPTION The showsnmpuser command displays information about one or all SNMP users, including the username, authentication and privacy protocols. WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security of the storage system. SYNTAX The syntax for the showsnmpuser command can be one of the following: showsnmpuser [] showsnmpuser AUTHORITY Any role in the system. OPTIONS None. SPECIFIERS Specifies the SNMPv3 username, using up to 31 characters. This specifier is not required on the command line. If no specifier is used, information about all SNMP users is displayed. RESTRICTIONS None. EXAMPLES The following example displays a list of all SNMP users: cli% showsnmpuser Username AuthProtocol PrivProtocol snmpadm HMAC-SHA-96 CFB128-AES-128 joe HMAC-SHA-96 CFB128-AES-128 NOTES The showsnmpuser command displays SNMPv3 user information for all local users when the is not provided or the information for just the local user with the name when it is provided. The output for users with a Browse or Service role is limited to the user's own accounts. If the is provided, it must be the user's name. SNMP users are created using the createsnmpuser command. showsnmpuser 475