HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 297

-ip Specifies the IP address of the host. -os Specifies the operating system running on the host. -model Specifies the model of the host. -contact Specifies the contact information for the host. -comment Specifies any additional information for the host. -name Specifies the new name of the host up to 31 characters in length. -persona Sets the host persona that specifies the personality for all ports which are part of the host set. This selects certain variations in SCSI command behavior which certain operating systems expect. The is the host persona ID number with the desired capabilities. These can be seen with showhost -listpersona. The following options are for use with the initchap and targetchap subcommands: -f Do not ask for confirmation before performing the operation. -chapname Used to specify the initiator or target CHAP name. If this option is not specified, then the initiator CHAP name defaults to the host name and the target CHAP name defaults to the HP 3PAR system name. -hex The CHAP secret is treated as a hex number. The following options are for use with the removechap subcommand: -target Removes only the target CHAP authentication. SPECIFIERS Name of the host with a maximum of 31 characters in length. Specifies that the properties are set for all hosts matching the specified pattern. The CHAP secret for the host or the target. If -hex is specified, it is treated as a hex number. Otherwise it should be a printable ASCII string 12 to 16 characters in length with no spaces, or 16 bytes in HEX. NOTE: The CHAP configuration operations are applied to all hosts whose names match one or more of the specified or . Refer to "Glob-Style Pattern" (page 12) for further information. sethost 297