HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 282

setcim DESCRIPTION The setcim command sets the properties of the CIM server, including options to enable or disable the HTTP and HTTPS ports for the CIM server. The command also provides the ability to configure the port numbers associated with these two protocols. In addition, it allows users to enable or disable the SLP port. SYNTAX setcim [options] AUTHORITY • Super, Service • Any role granted the cim_set right. NOTE: You need access to all domains in order to run this command. OPTIONS -f Forces the operation of the setcim command, bypassing the typical confirmation message. NOTE: At least one of the following options are required when issuing the setcim command. -slp enable|disable Enables or disables the SLP port. -http enable|disable Enables or disables the HTTP port. -httpport Sets the HTTP port (49152 - 65535). The default value is 5988. -https enable|disable Enables or disables the HTTPS port. -httpsport Sets the HTTPS port (49152 - 65535). The default value is 5989. SPECIFIERS None. RESTRICTIONS • Access to all domains is required to run this command. • You cannot disable both of the HTTP and HTTPS ports. • You cannot set the same port number for both of the HTTP and HTTPS ports. 282 Set Commands