HP 3PAR StoreServ 7400 2-node HP 3PAR Command Line Interface Reference (OS 3.1 - Page 326
setsnmppw, Specifies the new user-defined password using up to 50 alphanumeric characters.
View all HP 3PAR StoreServ 7400 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 326 highlights
setsnmppw DESCRIPTION The setsnmppw command allows a user to update SNMP access community strings passwords. The SNMP password is required for the system manager to send requests to the SNMP agent. WARNING! SNMP cannot be used in Common Criteria mode. It might compromise the security of the storage system. SYNTAX setsnmppw [options] AUTHORITY • Super • Any role granted the snmppw_set right. NOTE: You need access to all domains in order to run this command. OPTIONS -rw|-r|-w Specifies that the read-write (-rw), read-only (-r), or write-only (-w) community password is changed. If not specified, the read/write password is changed. SPECIFIERS Specifies the new user-defined password using up to 50 alphanumeric characters. RESTRICTIONS Access to all domains is required to run this command. EXAMPLES The following example changes the read/write SNMP community string password to newpassword1: cli% setsnmppw newpassword1 The following example changes the read-only SNMP password to newpassword2 by specifying the -r option on the command line: cli% setsnmppw -r newpassword2 The following example changes the write-only SNMP password to newpassword3 by specifying the -w option on the command line: cli% setsnmppw -w newpassword3 326 Set Commands