HP 5500dn HP Designjet 5500 series - User Guide - Page 134
Align Media with, that the edges are
View all HP 5500dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
tell me about front-panel messages Media misaligned. 1_ Lift lever 2_ Align Media with both edges of roll 3_ Lower lever A roll has been loaded incorrectly. For an animation of the roll loading procedure, see loading rolls into the printer. Remember to align the printing material coming out of the printer with the edge of the roll. Do not align it with the blue marks on the printer. Media misaligned. 1_ Lift lever 2_ Align right edge with blue line 3_ Lower lever A sheet has been loaded incorrectly. See how do I load sheets?. Media mispositioned. 1_ Lift lever 2_ Correct position 3_ Lower lever Media too small The roll is mis-positioned in For guidelines on loading the printer. This may mean rolls, see loading rolls it is too far to the left on into the printer. the platen. Remember to align the printing material coming out of the printer with the edge of the roll. Do not align it with the blue marks on the printer. The printing material you In the case of an internal are attempting to load is calibration, remember to too small for the printer to use at least a D-sized print the file. printing material. Misalignment This means that the printing material has not been fed into the printer straight. Reload the printing material, making sure that the edges are parallel and that it is straight when you feed it in. Align the material coming out from the printer with the material going into the printer. See loading rolls into the printer. Misposition The printing material is not Check that you have positioned correctly in the loaded the printing printer. It may be too far material correctly as to the left or the right. shown in the procedure loading rolls into the printer. No media profile available The printer cannot find the Unload any printing internal media profile. material in the printer and switch the printer off using the switch at the back. Switch on again. If the problem persists, call your HP representative. file:///C|/Documents%20and%20Settings/---/Desktop/HP/html/p0151.htm (4 of 8) [8/5/2002 4:23:08 PM]