HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1003

Chapter 21 S Commands system cores Send documentation comments to [email protected] system cores To enable copying the core and log files periodically, use the system cores command in configuration mode. To revert the switch to factory defaults, use the no form of the command. system cores {slot0: | tftp:} no system cores Syntax Description slot0 tftp: Selects the destination file system. Selects the destination file system. Defaults Disabled. Command Modes Configuration mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines Create any required directory before issuing this command. If the directory specified by this command does not exist, the switch software logs a syslog message each time a copy cores is attempted. Examples The following example enables periodic copying core and log files. switch# config terminal switch(config)# system cores slot0:coreSample The following example disables periodic copying core and log files. switch(config)# no system cores Related Commands Command show system cores Description Displays the currently configured scheme for copying cores. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 21-85