HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 764

logging console Chapter 14 L Commands Send documentation comments to [email protected] logging console To set console logging, use the logging console command. To negate the previously issued command or to revert to factory defaults, use the no form of the command. logging console [severity-level] no logging console [severity-level] Syntax Description severity-level Specifies the maximum severity of messages logged. The range is 0 to 7, where 0 is emergency, 1 is alert, 2 is critical, 3 is error, 4 is warning, 5 is notify, 6 is informational, and 7 is debugging. Defaults Disabled. The default severity level is 2. Command Modes Configuration mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines The switch logs messages at or above the configured severity level. Examples The following example reverts console logging to the factory set default severity level of 2 (critical). Logging messages with a severity level of 2 or above will be displayed on the console. switch# config terminal switch(config)# logging console 2 Related Commands Command show logging Description Displays logging configuration information. 14-16 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x