HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 190

clear crypto sa domain ipsec Chapter 4 C Commands Send documentation comments to [email protected] clear crypto sa domain ipsec To clear the security associations for IPsec, use the clear crypto sa domain ipsec command. clear crypto sa domain ipsec interface gigabitethernet slot/port {inbound | outbound} sa sa-index Syntax Description interface gigabitethernet slot/port inbound outbound sa sa-index Specifies the Gigabit Ethernet interface. Specifies clearing inbound associations. Specifies clearing output associations. Specifies the security association index. The range is 1 to 2147483647. Defaults None. Command Modes EXEC mode. Command History Release 2.0(x) Modification This command was introduced. Usage Guidelines To clear security associations, IPsec must be enabled using the crypto ipsec enable command. Examples The following example shows how to clear a security association for an interface. switch# clear crypto sa domain ipsec interface gigabitethernet 1/2 inbound sa 1 Related Commands Command show crypto sad domain ipsec Description Displays IPsec security association database information. 4-36 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x