HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 468

debug tlport Chapter 6 Debug Commands Send documentation comments to [email protected] debug tlport To enable debugging for TL port interfaces, use the debug tlport command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug tlport {all | errors | events {fc2 {terminal | transit} | mts | pss}} [interface fc slot/port] no debug tlport {all | errors | events {fc2 {terminal | transit} | mts | pss}} [interface fc slot/port] Syntax Description all errors events fc2 terminal transit mts pss interface fc slot/port Enables debugging for all TL port features. Enables debugging for TL port error conditions. Enables debugging for TL port monitoring events. Enables debugging for TL port monitoring FC 2 events. Specifies TL port monitoring FC 2 terminating events. Specifies TL port monitoring FC 2 transit events. Enables debugging for TL port monitoring MTS packets. Enables debugging for TL port monitoring PSS packets. Restricts debugging to the specified interface. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the system output when the debug tlport events pss command is issued: switch# debug tlport events pss Related Commands Command no debug all show tlport Description Disables all debugging. Displays configured TL port information. 6-122 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x