HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 766

logging level Chapter 14 L Commands Send documentation comments to [email protected] logging level To modify message logging facilities, use the logging level command. To negate the previously issued command or to revert to factory defaults, use the no form of the command. logging level facility-name severity-level no logging level facility-name severity-level Syntax Description facility-name severity-level Specifies the required facility name (for example acl, or ivr, or port, etc.) Specifies the maximum severity of messages logged. The range is 0 to 7, where 0 is emergency, 1 is alert, 2 is critical, 3 is error, 4 is warning, 5 is notify, 6 is informational, and 7 is debugging. Defaults Disabled Command Modes Configuration mode. Command History Release 1.3(1) Modification This command was introduced. Usage Guidelines The switch logs messages at or above the configured severity level. Examples Configures Telnet or SSH logging for the kernel facility at level 4 (warning). As a result, logging messages with a severity level of 4 or above will be displayed. switch# config terminal switch(config)# logging level kernel 4 Related Commands Command show logging Description Displays logging configuration information. 14-18 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x