HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 904

role name Chapter 20 R Commands Send documentation comments to [email protected] role name To configure and assign users to a new role or to modify the profile for an existing role, use the role name command in configuration mode. Use the no form of this command to delete a configured role. role name name [description user description] [rule number permit clear feature name |permit config feature name | permit debug feature name | permit show feature name] [rule number deny clear feature name | deny config feature name | deny debug feature name | deny exec feature name | deny show feature name] no role name name [description user description] [rule number permit clear feature name | permit config feature name | permit debug feature name | permit show feature name] [rule number deny clear feature name | deny config feature name | deny debug feature name | deny exec feature name | deny show feature name] Syntax Description name description user description exit no rule number permit deny clear config debug show feature exec name Name of the role to be created or modified. The maximum number of roles is 64. Add a description for the role. The maximum size is 80. Add description of users to the role. Exit from this submode Negate a command or set its defaults Enter the rule keyword. Enter the rule number 1-16. Add commands to the role. Remove commands from the role. Clear commands Configuration commands Debug commands Show commands Enter the feature name Exec commands Enter the feature name (Max Size - 32) Defaults None. Command Modes Configuration mode. Command History Release 1.0(2) Modification This command was introduced. 20-34 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x