HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 740

job name Chapter 12 J Commands Send documentation comments to [email protected] job name To assign a job to a command schedule, use the job name command. To remove the job, use the no form of the command. job name job-name no job name job-name Syntax Description job-name Specifies the job name for the command schedule to run. Defaults None. Command Modes Scheduler schedule configuration submode. Command History Release 2.0(x) Modification This command was introduced. Usage Guidelines To use this command, the command scheduler must be enabled using the scheduler enable command. You can configure multiple jobs in a command schedule. Examples The following example shows how to specified the job for a command schedule. switch# config terminal switch(config)# scheduler schedule name MySchedule switch(config-schedule)# job name MyJob Related Commands Command scheduler enable scheduler schedule name show scheduler Description Enables the command scheduler. Configures a schedule for the command scheduler. Displays scheduler information. 12-2 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x