HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 882

rate-mode bandwidth-fairness Chapter 20 R Commands Send documentation comments to [email protected] rate-mode bandwidth-fairness To enable or disable bandwidth fairness among ports in a port group, use the rate-mode bandwidth-fairness command in configuration mode. To disable bandwidth fairness, use the no form of the command. rate-mode bandwidth-fairness module module-id no rate-mode bandwidth-fairness module module-id Syntax Description module module-id Specifies the module number. Defaults Enabled. Command Modes Configuration mode. Command History Release 3.1(2) Modification This command was introduced. Usage Guidelines Enter the command separately for each module you want to enable or disable bandwidth fairness. Note This feature is only supported on 48-port and 24-port 4-Gbps Fibre Channel switching modules. Examples The following example shows how to enable bandwidth fairness for a module. switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# rate-mode bandwidth-fairness module 1 The following example shows how to disable bandwidth fairness for a module. switch# config terminal Enter configuration commands, one per line. End with CNTL/Z. switch(config)# no rate-mode bandwidth-fairness module 1 Related Commands Command show module bandwidth-fairness Description Displays bandwidth fairness status. 20-12 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x