HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 95

Chapter 1 CLI Overview Searching and Filtering CLI Output Send documentation comments to [email protected] Multiple Filter Commands Cisco MDS SAN-OS Release 2.1(1a) supports using multiple filters in the same show command output. This means you can use a combination of the available filters to format the output of any show command. Note The maximum number of commands allowed is four. For example, you can enter a maximum of three filter commands or two filter commands and a redirection. Cisco MDS SAN-OS Release 2.1(1a) also supports both filters and redirection in the same command. Now you can apply the required filters to the output of any command, and save the output using the file redirection. See the next section, "Searching and Filtering CLI Output Examples" section on page 1-21. Searching and Filtering CLI Output Examples The following is partial sample output of the show running-config | begin EXEC command. It begins displaying unfiltered output with the first line that contain the pattern vsan. switch# show running-config | begin vsan fcdomain fcid persistent vsan 1 fcdomain fcid persistent vsan 2 fcdomain fcid persistent vsan 3 fcdomain fcid persistent vsan 101 fcdomain fcid persistent vsan 102 fcdomain fcid database vsan 1 wwn 29:00:00:05:30:00:06:ea fcid 0x680000 dynamic vsan 1 wwn 28:0f:00:05:30:00:06:ea fcid 0x680001 dynamic vsan 1 wwn 28:10:00:05:30:00:06:ea fcid 0x680002 dynamic vsan 1 wwn 28:11:00:05:30:00:06:ea fcid 0x680003 dynamic vsan 1 wwn 28:12:00:05:30:00:06:ea fcid 0x680004 dynamic vsan 1 wwn 28:13:00:05:30:00:06:ea fcid 0x680005 dynamic vsan 1 wwn 28:14:00:05:30:00:06:ea fcid 0x680006 dynamic vsan 1 wwn 28:1f:00:05:30:00:06:ea fcid 0x680007 dynamic vsan 1 wwn 28:20:00:05:30:00:06:ea fcid 0x680008 dynamic vsan 1 wwn 21:00:00:e0:8b:05:76:28 fcid 0x680100 area dynamic vsan 1 wwn 20:c5:00:05:30:00:06:de fcid 0x680200 area dynamic vsan 1 wwn 28:2b:00:05:30:00:06:ea fcid 0x680012 dynamic vsan 1 wwn 28:2d:00:05:30:00:06:ea fcid 0x680013 dynamic vsan 1 wwn 28:2e:00:05:30:00:06:ea fcid 0x680014 dynamic vsan 1 wwn 28:2f:00:05:30:00:06:ea fcid 0x680015 dynamic vsan 1 wwn 28:30:00:05:30:00:06:ea fcid 0x680016 dynamic --More-- The following is partial sample output of the show tech-support EXEC command. It begins displaying unfiltered output with the first line that contain the string show interface brief. switch# show tech-support | begin "show interface brief show interface brief Interface Vsan Admin Admin Status FCOT Oper Oper Port Mode Trunk Mode Speed Channel Mode (Gbps) fc4/1 1 FX -- sfpAbsent -- -- -- fc4/2 1 FX -- sfpAbsent -- -- -- fc4/3 1 FX -- sfpAbsent -- -- -- fc4/4 1 FX -- sfpAbsent -- -- -- fc4/5 1 FX -- up swl F 1 -- OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 1-21