HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 132

active equals saved Chapter 2 A Commands Send documentation comments to [email protected] active equals saved Enable the active equals saved command to automatically write any changes to the block, prohibit or port address name to the IPL file. To disable the configuration or to revert to factory defaults, use the no form of the command. active equals saved no active equals saved Syntax Description This command has no other arguments or keywords. Defaults Disabled. Command Modes FICON configuration submode. Command History Release 1.3(1) Modification This command was introduced. Usage Guidelines Enabling active equals saved ensures that you do not have to perform the copy running-config startup-config command to save the FICON configuration as well as the running configuration. If your switch or fabric consists of multiple FICON-enabled VSANs, and one of these VSANs has active equals saved enabled, changes made to the non-FICON configuration causes all FICON-enabled configurations to be saved to the IPL file. Note Refer to the Cisco MDS 9000 Family CLI Configuration Guide for further information. Examples The following example enables the automatic save feature for a VSAN. switch(config)# ficon vsan 2 switch(config-ficon)# active equals saved The following example disables the automatic save feature for this VSAN. switch(config-ficon)# no active equals saved Related Commands Command copy running-config startup-config ficon vsan show ficon Description Saves the running configuration to the startup configuration. Enables FICON on the specified VSAN. Displays configured FICON details. 2-12 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x