HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 455

Chapter 6 Debug Commands debug security Send documentation comments to [email protected] debug security To enable debugging for the security and accounting features, use the debug security command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug security {all | events | mts | radius} no debug security {all | events | mts | radius} Syntax Description all events mts radius Enables debugging for all security features. Enables debugging for security events. Enables debugging for security MTS packets. Enables debugging for RADIUS events. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines None. Examples The following example displays the system output when the debug security radius command is issued: switch# debug security radius Mar 5 00:51:13 securityd: RADIUS is enabled, hence it will be tried first for CHAP authentication Mar 5 00:51:13 securityd: reading RADIUS configuration Mar 5 00:51:13 securityd: opening radius configuration for group:default Mar 5 00:51:13 securityd: opened the configuration successfully Mar 5 00:51:13 securityd: GET request for RADIUS global config Mar 5 00:51:13 securityd: got back the return value of global radius configuration operation:success Mar 5 00:51:13 securityd: closing RADIUS pss configuration Mar 5 00:51:13 securityd: opening radius configuration for group:default Related Commands Command no debug all Description Disables all debugging. OL-16217-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Command Reference 6-109