HP Cisco MDS 9020 Cisco MDS 9000 Family Command Reference - Cisco MDS SAN-OS R - Page 1064

show cli variables Chapter 22 Show Commands Send documentation comments to [email protected] show cli variables To display user-defined session and persistent CLI variables, use the show cli variables command. show cli variables Syntax Description This command has no arguments or keywords. Defaults None. Command Modes EXEC mode. Command History Release 3.0(1) Modification This command was introduced. Usage Guidelines The show CLI variables command shows all available CLI variables, including user-defined session CLI variables, user-defined persistent CLI variables, and system-defined CLI variables. There is no distinction between the types of CLI variables in the output. Examples The following example displays CLI variables. switch# show cli variables VSH Variable List TIMESTAMP="2005-10-24-21.29.33" testinterface="fc 1/1" Note The TIMESTAMP variable shown in the output in the preceding example is a predefined variable supported by Cisco MDS SAN-OS. For more information about the TIMESTAMP variable, refer to the Cisco MDS 9000 Family CLI Configuration Guide. Related Commands Command cli var name cli var name (configuration) Description Defines a CLI session variable. Defines a CLI persistent variable. 22-32 Cisco MDS 9000 Family Command Reference OL-16217-01, Cisco MDS SAN-OS Release 3.x